Earpiece Spares/ Compatibility

The list below gives guidance for compatibility with your radio. We only keep information on Kenwood, Motorola, Icom, Maxon and other main brand radios. If your radio is a professional or licensed radio please phone for more information.

If your radio is licence-free PMR446 radio then please take time to study the information below, carefully measure the type of connectors on your radio and compare against those listed. If you still are not sure then please EMAIL the following information.

1. Radio make and model.
2. Centre to Centre pin spacing (if two sockets.)
3. Socket diameters.

We have a relaxed returns policy. See Ordering page.

All the T series Motorola Radios. T6222, T5512, T5522. T5146 etc (except TA200 see Standard Right Angle)
Single right angle longreach 2.5mm stereo plug. Note this is NOT a standard stereo plug being 2mm longer than normal. A standard adapter is available.

Tip: Speaker
Ring: Mic
Sleeve: Common (Ground)

ORDER SUFFIX -T

The 2 pin Motorola plug for GP300 located on the top of the radio as well as the XTN where it is mounted on the side. Fits many other Motorolas.

Can also be used with adapter AM2 for the GP320-40 radios.

Ear 3.5mm mono.
Mic 2.5mm mono.
Spaced 8mm.

ORDER SUFFIX-M

Fits virtaully all Kenwood radios.

Can also be used with adapter AK2 for the new Kenwood radios.

Twin right angle.
Ear 2.5mm stereo. (top pin)
Mic 3.5mm stereo. (bottom pin)
Spaced 12mm

ORDER SUFFIX -K

This plug fits most of the newer Icom radios. IC-F3/4 etc.

2 Pin Right Angle Plug
Mic 2.5mm mono. (top pin)
Ear 3.5mm mono. (bottom pin)
Spaced 10mm.

ORDER SUFFIX -I

To fit most newer Maxon Radios
Like Standard right angle Plug but the other way up.

Twin right angle.
Ear 3.5mm stereo. (top pin)
Mic 2.5mm stereo. (bottom pin)
Spaced 10 mm

ORDER SUFFIX -X

To fit most newer Yaesu radios
Like stereo 3.5mm plug but with 4 connectors.

Single 3.5mm plug
4 connectors

ORDER SUFFIX -Y