WD-K10TRE DECT Wireless Full-Duplex System

Part Number: WD-K10 DECT

Typical Applications

  • Marine Industries
  • Film, TV, Theatre
  • Retail & Public Facing
Call for price
enquire about this product
WD-K10 System
WD-K10TR Full Duplex DECT Tranceiver
WD-K10 System
Click Photo to Enlarge
WD-K10TRE DECT Wireless Full-Duplex System
WD-K10TRE DECT Wireless Full-Duplex System
WD-K10TRE DECT Wireless Full-Duplex System
WD-K10TRE DECT Wireless Full-Duplex System
Product Information
Technical & PDF
Accessories & Spares
Knowledge Base

Key Features

  • Wireless communications without button pressing.
  • Full duplex Intercom with 2 to 10 users per base station.
  • Fully self-contained with lightweight headsets or ear-defenders for full-duplex use.
  • Audio gateway/ interface for other communications systems.
  • Fully intuitive in use - Virtually no training required.
  • Encrypted for voice security.

The Kenwood Protalk FD DECT communications system is a full duplex (no button pressing) intercom or can be used in conventional push-to-talk mode.

The WD-K10TRE is the standard belt pack or transceiver unit for the Protalk FD systems. It requires one WD-K10PBSE or one WD-K10BSE to make a full duplex system. 10 belt-packs can be paired in full-duplex and many more as listeners.

It uses DECT technology which in our experience is much more interference free than Bluetooth and similar 2.4Ghz systems. networks to give coverage for virtually any application where one or many users need to talk instantly and interrupt one another freely and without button pressing.

All users hear each other, can talk over one another and communicate instantly and naturally without pauses, dialling or button presses. It can also be configured to work in Push to Talk Mode when users mostly only listen.

As a hand-held unit it works in PTT mode but with headset can be Full Duplex or PTT at the push of a button.

Licence-free full-duplex will give a range as large as your Wifi coverage this can be from one or many Wireless access points with seamless roaming between them. Works on 2.5Ghz and 5Ghz Wifi so interference from other system can be avoided The system can be portable, vehicle or site installed so users can roam over entire sites without losing comms.

Existing two-way radios, Tetra or phone communications can be interfaced keeping the WD users in communication with wider area voice systems, site alarms and paging.

K10D System.


Applications / Other Information

  • A wide range of headsets are available.
  • Base unit which can be powered by 12/110/240 and battery (portable version).
  • Wireless Bridges for wide area coverage powered 12/110/240 and battery (portable version).
  • Radio Communications interface available.
  • Can be connected to IP phones.

PDF Downloads

K10 Brochure

Click here to view answers to your questions about radio and wireless voice communications.

01904 630 686
Get in touch!... No automated answering, just real human beings ready to help.

Contact Us

Wildtalk Ltd
Unit 4, 35 Hospital Fields Rd
YO10 4DZ

Tel | 01904 630 686
Fax | 01904 380 453
email: help@wildtalk.com