Icom IP-100H Wifi Radio & Intercom System

The Icom IP100 communications system is a full duplex (no button pressing) intercom or can be used in conventional push-to-talk mode.

It uses existing Wifi 2.4 and 5Ghz networks to give coverage for virtually any application where one or many users need to talk instantly and interrupt one another freely and without button pressing.

All users hear each other, can talk over one another and communicate instantly and naturally without pauses, dialling or button presses. It can also be configured to work in Push to Talk Mode when users mostly only listen.

As a hand-held unit it works in PTT mode but with headset can be Full Duplex or PTT at the push of a button.

Licence-free full-duplex will give a range as large as your Wifi coverage this can be from one or many Wireless access points with seamless roaming between them. Works on 2.5Ghz and 5Ghz Wifi so interference from other system can be avoided The system can be portable, vehicle or site installed so users can roam over entire sites without losing comms.

Existing IP phones, two-way radio, Tetra or phone communications can be interfaced keeping the IC100 users in communication with wider area voice systems, site alarms and paging.

Video Introduction. Further details at the Icom website: