This ruggedised housing enables you to use the WD-K10BSE Base Station wirelessly and in harsh environments. It protects the Base Station from water, dust and contamination.
An internal battery gives 20 hours of use between charges. It can be charged from 240/110Vac and 12Vdc for in-vehicle charging.
The unit is powered on and off from an external waterproof switch with LEd Indicator. This LED indicates both power On and flashes when the battery charge is getting low.WD-K10BSE Ruggedised Base Station extends range of the Kenwood DECT handsets and allows interfacing to other communications systems. With one or more WD-K10TRE units a full duplex system is built.
The K10BSE functions as an audio gateway to allow, PA, Alarm and entertainment audio to be routed to the users headsets.
Multiple K10BSE units can be cable connected to exchange coverage over wider areas.
The Kenwood Protalk FD DECT communications system is a full duplex (no button pressing) intercom or can be used in conventional push-to-talk mode.
It uses DECT technology which in our experience is much more interference free than Bluetooth and similar 2.4Ghz systems. networks to give coverage for virtually any application where one or many users need to talk instantly and interrupt one another freely and without button pressing.
All users hear each other, can talk over one another and communicate instantly and naturally without pauses, dialling or button presses. It can also be configured to work in Push to Talk Mode when users mostly only listen.
As a hand-held unit it works in PTT mode but with headset can be Full Duplex or PTT at the push of a button.
Existing two-way radios, Tetra or phone communications can be interfaced keeping the WD users in communication with wider area voice systems, site alarms and paging.
Applications / Other Information
PDF DownloadsK10 Brochure
Click here to view answers to your questions about radio and wireless voice communications.